The Lynx Distributor is the fused half of the Lynx system. Four outgoing circuits, each with its own MEGA fuse holder, on a busbar that bolts straight to a Lynx Power In or Lynx Smart BMS.

The LEDs are the good part

Each fuse position has a status LED. When a fuse blows, the light tells you which one — immediately, without pulling fuses one at a time with a multimeter in a dark storage bay.

Anyone who has chased a dead circuit in a vehicle at night understands why that is worth paying for. It turns a thirty-minute job into a five-second glance.

Proper fusing, properly placed

Every high-current circuit should be fused close to the power source. In practice a lot of builds end up with inline fuse holders zip-tied along the cable run because there was nowhere good to mount them. This puts all four in one place, at the busbar, where they belong.

MEGA fuses cover the current ranges that matter here — inverters, winch feeds, DC-DC chargers, main distribution to a fuse block.

Modular

Bolts to the rest of the Lynx range to form one continuous busbar under a single cover. Add a Power In for the incoming side, or build onto a Lynx Smart BMS if you are running a managed lithium bank.

Specifications

• 4 fused outputs, MEGA fuse holders
• LED fuse status indication per position
• M10 terminal studs
• Bolts directly to other Lynx modules
• Weight: 5.75 lb
• Manufacturer part number: LYN060102010

Fuses sold separately

MEGA fuses are chosen to match each circuit's cable and load, so they are not included. Tell us what you are running on each output and we will tell you what amperage fuses to order.