A single connector panel with a zipper, a rear flap and a wall section, for joining two HD Nomadic 180 awnings.

Connector pieces join two HD Nomadic 180 awnings together. Run a 180 on each side of the vehicle and there is a gap where the two canopies meet. The connector slides into the same channel the awnings use and bridges that gap, so instead of two separate patches of shade you get continuous cover — up to 360 degrees around the vehicle or trailer.

The extras are what separate this from the plain panel. The wall section lets the connected span close in at the side rather than staying open, the rear flap extends cover in toward the centre of the vehicle or trailer, and the zipper is what joins it all up. In practice that is the difference between more shade and an actually sheltered space.

One panel closes one junction. If you want both sides of a two-awning setup closed in, look at the two-piece version.

You need two 180 awnings for this to do anything. It is not a wall, it is not an awning, and it does nothing on its own or on a single awning. OVS specifies the two awnings mounted about 59 inches apart, base to base, on 55 inch crossbars. Each connector panel is 60.5 inches wide.

Not sure whether your two awnings are spaced right for this? Send us a photo of the rack and we will work it out with you before you order.